Steel · Stainless steel, austenitic · isotropic

1.4404 (X2CrNiMo17-12-2)

Name: 1.4404 (X2CrNiMo17-12-2) — material properties (EN 1993-1-4 · EN 10088)
Creator: BadgerMecX

EN 1993-1-4 · EN 10088 · annealed (nominal design values) · also X2CrNiMo17-12-2

1.4404 (X2CrNiMo17-12-2) is an austenitic stainless steel to EN 1993-1-4 · EN 10088. Its nominal yield strength is 200–240 MPa, depending on the product form and thickness. E = 200 GPa, ν = 0.3 and α = 16 × 10⁻⁶/K (design values).

Record: stainless-14404
Library: v1.1.0
Properties: 10
Sources: 2
Build check: passed ✓
Viewing as: guest

E · Young's modulus 200GPa design^[1]

ν · Poisson's ratio 0.3– design^[1]

f_y · Yield strength (R_eH / R_p0.2) 240MPa nominal^[1]C · t ≤ 8 mm

f_u · Tensile strength (R_m) 530MPa nominal^[1]C · t ≤ 8 mm

ρ · Density 8000kg/m³ typical^[2]

α · Coefficient of thermal expansion 1610⁻⁶/K typical^[2]

λ · Thermal conductivity 15W/(m·K) typical^[2]

c_p · Specific heat capacity 500J/(kg·K) typical^[2]

Elastic constants

isotropic

Symbol	Property	Value	Unit	Basis	Ref.
E	Young's modulus ⓘ EN 1993-1-4 2.1.3	200	GPa	design	[1]
ν	Poisson's ratio	0.3	–	design	[1]
G	Shear modulus ⓘ G = E/(2(1 + ν)); SCI P413 rounds it to 76.9 GPa for 200 GPa	76.92	GPa	derived	[1]
K	Bulk modulus K = E / 3(1 − 2ν)	166.7	GPa	derived	—
λ_L	Lamé constant λ_L = Eν / (1 + ν)(1 − 2ν)	115.4	GPa	derived	—
c₀	Bar wave speed c₀ = √(E/ρ)	5000	m/s	derived	—

Physical, thermal and electrical

at 20 °C

Symbol	Property	Value	Unit	Basis	Ref.
ρ	Density ⓘ EN 10088-1 values as quoted by Outokumpu	8000	kg/m³	typical	[2]
α	Coefficient of thermal expansion ⓘ mean, 20–100 °C	16	10⁻⁶/K	typical	[2]
λ	Thermal conductivity ⓘ at 20 °C	15	W/(m·K)	typical	[2]
c_p	Specific heat capacity ⓘ at 20 °C	500	J/(kg·K)	typical	[2]
ρ_e	Electrical resistivity ⓘ at 20 °C	0.75	µΩ·m	typical	[2]
a	Thermal diffusivity a = λ / (ρ·c_p)	3.75	mm²/s	derived	—

Strength

a band applies up to and including its upper limit

Property	Product form	Thickness	Value	Unit	Basis	Ref.
f_y	C — cold rolled strip	t ≤ 8 mm	240	MPa	nominal	[1]
f_y	H — hot rolled strip	t ≤ 13.50 mm	220	MPa	nominal	[1]
f_y	P — hot rolled plate	t ≤ 75 mm	220	MPa	nominal	[1]
f_y	B — bars, rods and sections	t ≤ 250 mm	200	MPa	nominal	[1]
f_u	C — cold rolled strip	t ≤ 8 mm	530	MPa	nominal	[1]
f_u	H — hot rolled strip	t ≤ 13.50 mm	530	MPa	nominal	[1]
f_u	P — hot rolled plate	t ≤ 75 mm	520	MPa	nominal	[1]
f_u	B — bars, rods and sections	t ≤ 250 mm	500	MPa	nominal	[1]

Symbol	Property	Value at t = 8 mm · C	Unit	Basis	Ref.
f_y	Yield strength (R_eH / R_p0.2) ⓘ 0.2 % proof strength, EN 1993-1-4 Table 2.1	240	MPa	nominal	[1]
f_u	Tensile strength (R_m)	530	MPa	nominal	[1]

Sources

every value names one

EN 1993-1-4:2006+A1:2015, Eurocode 3 — Stainless steels, Table 2.1 and 2.1.3Copies checked: 1, 2
EN 10088-1, Stainless steels — List of stainless steels, physical properties (as quoted by Outokumpu datasheets)Copies checked: 1, 2, 3, 4

min product standard minimum char characteristic design code value for design typical datasheet or textbook derived worked out here, formula shown

Cite this page

for reports and papers

BadgerMecX Materials (2026). 1.4404 (X2CrNiMo17-12-2) — material properties, EN 1993-1-4 · EN 10088. Library v1.1.0, record stainless-14404. https://badgermecx.com/materials/stainless-14404/ (accessed 2026-10-08).

@misc{badgermecx_stainless14404,
  title  = {1.4404 (X2CrNiMo17-12-2) -- material properties, EN 1993-1-4 · EN 10088},
  author = {{BadgerMecX Materials}},
  year   = {2026},
  note   = {Library v1.1.0, record stainless-14404},
  url    = {https://badgermecx.com/materials/stainless-14404/}
}

Export and related

SI units, every value with basis and source