EN AW-5083 H14/H24/H34 vs EN AW-6082 T6

EN AW-6082 T6 and EN AW-5083 H14/H24/H34 are about equally stiff. Their densities are about the same. Per unit mass they are about equally stiff (25.93 and 25.93 MJ/kg). Strength: f_o = 235 MPa for EN AW-5083 H14/H24/H34, f_o = 250 MPa for EN AW-6082 T6.

EN AW-5083 H14/H24/H34 EN 1999-1-1 · t ≤ 5 mm · DT EN AW-6082 T6 EN 1999-1-1 · t ≤ 5 mm · EP/O, EP/H, ET

Side by side

ratio = EN AW-6082 T6 / EN AW-5083 H14/H24/H34 · log scale

Property	EN AW-5083 H14/H24/H34	EN AW-6082 T6	Unit	Ratio
E Young's modulus	70	70	GPa	1×
G Shear modulus	27	27	GPa	1×
ν Poisson's ratio	0.3	0.3	–	1×
ρ Density	2700	2700	kg/m³	1×
α Coefficient of thermal expansion	23	23	10⁻⁶/K	1×
λ Thermal conductivity	110	170	W/(m·K)	1.55×
σ_e Electrical conductivity	16	24	MS/m	1.5×
f_u Tensile strength (R_m)	300	290	MPa	0.967×
f_o 0.2 % proof strength	235	250	MPa	1.06×
f_o,haz 0.2 % proof strength in the heat-affected zone	135	125	MPa	0.926×
f_u,haz Tensile strength in the heat-affected zone	270	185	MPa	0.685×
E/ρ Specific stiffness E/ρ · derived	25.93	25.93	MJ/kg	1×
c₀ Bar wave speed √(E/ρ) · derived	5092	5092	m/s	1×
f/ρ Specific strength f/ρ · derived	87.04	92.59	kJ/kg	1.06×

Values at the first thickness band or product form of each material (EN 1999-1-1 · t ≤ 5 mm · DT; EN 1999-1-1 · t ≤ 5 mm · EP/O, EP/H, ET). A minimum and a characteristic value are not the same kind of number — read the ratio as a guide. Each material's page lists every band and every source.